Travel Ready 3dresyn Im-f-ss Bio, Solvent Soluble Flexible 3d Resin For Printing Solvent Soluble Sacrificial Materials With Sla, Dlp & Lcd Printers - Don't Overpay [4Rrnhtva]
3Dresyn IM-F-SS Bio is our solvent soluble flexible photopolymer 3Dresin for printing solvent soluble sacrificial materials with SLA, DLP & LCD printers.
Features and benefits:
- photoreactive liquid 3D resin which dissolves in solvents, such as acetone, after printing
- soluble before and after printing in non polar solvents, specially in our biocompatible and ultra safe Solvent Solution SS1 Bio
- bio based from renewable resources: 80% bio content
- safe handling and printing
- supplied in clear and cyan, magenta, yellow, black and white colors
- ideal for both relatively thick prints and filigree ultra fine detailed printing
- typical printing speeds at different printing settings:
- exposure times <20-25 seconds for 50 microns z layers with medium power 4-8 mW/cm2 printers (monochrome LCD printers)
- exposure times <10-15 seconds for 50 microns z layers with high power >10-15 mW/cm2 printers (high power DLP printers)
- Shore hardness A90
- tensile and flexural strength <2MPa
- Young modulus <200 MPa
- elongation <50%
- postcuring is not required
- Heat Deflection Temperature HDT after curing <30º[email protected]
- no shrinkage during 3D printing (<1%)
- prints are 100% soluble in acetone
- organo-tin free
- printable with top-down and bottom-up printers
- recommended printing temperature 20-25ºC
- ultra low viscosity <10 cps at 25ºC
- level of printing difficulty: medium-high
Note: soluble materials may swell instead of dissolve in some printing settings, especially when cured at high relative power and energy dosage, such as with high power laser and DLP printers
Travel Ready 3dresyn Im-f-ss Bio, Solvent Soluble Flexible 3d Resin For Printing Solvent Soluble Sacrificial Materials With Sla, Dlp & Lcd Printers - Don't Overpay [4Rrnhtva]
